It has been very hard working trying to get specialist help with some of my Bond rebuild. Cannot find anyone to soda blast the body that actually turns up.
Main Kawasaki dealers keep letting me down with wiring help.
I am having a dual battery system installed, one for the Can-bus system and one for ancillaries. Far to complicated to try and do myself.
However the mechanical stuff the Bug is now being stripped back to individual component parts and will be going off for bead blasting and powder coating next week.
I am having the LSD axle stripped back to casing , bead blasted then then out back together with a new set of bearings and seals.
I had a new electric water pump fitted this week and existing impeller and shaft removed from the engine, they also fitted a custom billet sump shipped from the USA to prevent problems going around corners with oil starvation.
I already have the prop shaft back ready to take for balancing at a specialist in Stowmarket next week.
Very slow going project so far but making some progress.
I’m in same boat pal however, take care about the soda blasting part!! I have took mine to a specialist who only deals with fibreglass and I mentioned this soda process and he said he advises against it. This guy is soooo experienced he repairs racing cars, they go out his yard looking like super new and they come back in pieces normally in a box for him to fix back up lol... it’s yiur choice pal but not sure this old shells would have a good end finish with soda I’d stick to rubbing down and a bit of finesse for the best finish...
mybug: Anyone know the whereabouts of PTO 365M? It was mine back in the early 80s and some pix have surfaced here (apparently from ebay around 5 years ago) so is it still around?
Jan 14, 2019 13:58:31 GMT
karl: Andrea, just seen your post. if you're still looking try putting it in the for sale wants thread.
Jan 14, 2019 19:58:09 GMT
mybug: Searched and spooled through every image/video/old ad I can find on the internet, I'm thinking that PTO 365M is not around any more. May be resting in a shed, but given the small and tight-knit Bug community, I'd have thought that someone would know it.
Jan 16, 2019 14:19:51 GMT
Biggles: I think David and Jim Williams are doing the Hinges ....
Jan 27, 2019 9:41:59 GMT
Dave Powell: David did me some great hinges.
Feb 11, 2019 21:52:09 GMT
mikebentley: how does this shout box work?
Feb 16, 2019 13:40:51 GMT
nigel1962: Hi mark ,did you get my reply
Feb 18, 2019 20:44:05 GMT
crabo: Does anyone have the registration plate numbers or the chassis numbers for the Rothmans Bugs (six of). I friend of mine has just purchased a white Bug (700E) in need of restoration, reg URC 42L, chassis no BR62313, eng no 9816.
Mar 27, 2019 19:41:42 GMT
jefferdp: All, does anyone know the size of the headlights on the bug, Some say there 7/6" but that seems a little large to me. Also where can you get replacments now?
Apr 4, 2019 16:54:48 GMT
fmb4: My Bug has nothing but a hole where the canopy latch should be. Any help in finding one would be greatly appreciated!
Apr 9, 2019 14:55:30 GMT
Biggles: fmb4 One on ebay now
Apr 13, 2019 9:16:03 GMT
heartnut: Quick question: If I fit a Lucas 15/16/18 alternator, is it true that it will heed fibreglass work to fit it as the body is bigger than the original generator?
Apr 26, 2019 19:14:47 GMT
rolydog2001: I have fitted a Dynamator to get around this, looks original and gives the same output.
Apr 27, 2019 19:25:09 GMT
heartnut: Thanks for that - good tip!
May 2, 2019 20:21:08 GMT
tpg: can you please help? my son is nearing the end of a 4 year restoration of his mini cooper car and we are trying to locate 2 of the above wheels to make up a set. Would you know any of your colleagues who may know anybody who would sell us 2 alloys. Any inf
May 12, 2019 13:59:52 GMT
tpg: Sorry the wheels are Dunlop D1 LP922 X 10inch. thanks
May 12, 2019 14:01:25 GMT
tpg: Hi dose anybody have 2 DUNLOP D1 LP922 ALLOYS for sale? URGENTLY required
May 25, 2019 9:53:39 GMT
fmb4: I am in desperate need of a latching assembly for my canopy. I am restoring, and have only a hole where it would have been. Any help would be greatly appreciated. Maybe some one could send me detailed photos of same so I could perhaps have one made
Jun 10, 2019 21:52:08 GMT
rolydog2001: I'm about to fit mine soon, if you can drop me a PM via the forum with your email (or whats app better) I can send you some pics.
Jun 15, 2019 19:06:17 GMT