|
|
Post by alpine6969 on May 25, 2020 20:10:43 GMT
Looking for bushes for rear trailing arms pushed rubbers out but left a metal sleeve in with a diameter of 24 mm if the sleeve came out as well not sure if your ment to remove this the diameter would be about 26 mm any advise greatly appreciated
|
|
|
|
Post by UncleFester on May 25, 2020 21:15:39 GMT
Looking for bushes for rear trailing arms pushed rubbers out but left a metal sleeve in with a diameter of 24 mm if the sleeve came out as well not sure if your ment to remove this the diameter would be about 26 mm any advise greatly appreciated Outer sleeve comes out too, run a saw through the sleeve to release the tightness of the outer sleeve. have seen some listed on Ebay |
|
|
|
Post by vannin on May 26, 2020 7:44:30 GMT
N.B replace them with standard bushes and not any poly type uprated ones
|
|
|
|
Post by rogeru7 on May 26, 2020 16:04:29 GMT
Looking for bushes for rear trailing arms pushed rubbers out but left a metal sleeve in with a diameter of 24 mm if the sleeve came out as well not sure if your ment to remove this the diameter would be about 26 mm any advise greatly appreciated Outer sleeve comes out too, run a saw through the sleeve to release the tightness of the outer sleeve. have seen some listed on Ebay In the event you have never fitted these types of bushes before you should only press them in the arms via the outer steel sleeve only and never the inner liner as this will damage the rubber bonding |
|
|
|
Post by alpine6969 on May 28, 2020 20:22:03 GMT
Could you tell me how they are listed on eBay thanks
|
|
|
|
Post by rolydog2001 on May 28, 2020 20:33:22 GMT
Could you tell me how they are listed on eBay thanks Got mine from Dave Hemsley at the Bug spares scheme. May be worth a shout? |
|
